Arduino中国 | Flamingo EDA

Dec/08

29

通用型HS-422标准舵机支架

8 Comments · Posted by flamingoeda in Arduino

新版本的传感器扩展板能够很方便地连接舵机，这样Arduino本身就能够很容易地变成一个舵机控制器，再加上这里要介绍的舵机支架，应该能够满足很多需要动作控制的场景。经过氧化处理后的两个铝支架，与两个标准 HS-422 舵机互相配合，能够完成水平和垂直方向上150度的转动效果：




8 comments

  • drhades · 2008/12/29 at 9:22 AM

    赞

  • sbilly · 2008/12/29 at 10:17 AM

    哪弄的啊？？

  • Author comment by flamingoeda · 2008/12/30 at 1:06 PM

    参考已经成形的设计，然后自己请工厂加工的;-)

  • tlfong01 · 2009/01/02 at 4:13 PM

    2009年1月1日 星期四

    I appreciated your writing of the research and development of the Arduino general purpose I/O expansion shield.

    I only recently bought 2 Arduino Decimilla and 1 Seeeduino broads to play with serial communication (RS232 and I2C). I also wish to try RF and Bluetooth etc, but I am only thinking or dreaming now, because I only started playing with microcontrollers 6 months ago, and I have been going very slow because I did not have much free time.

    Your Arduino blog encourages me to go faster, because it for sure makes my learning curve shallower. I hope to catch up soon.

  • Author comment by flamingoeda · 2009/01/04 at 11:46 AM

    Thanks very much. I have been encouraged a lot by your comments, and I will keep on working and enjoying :-)

  • howie · 2009/02/10 at 8:45 PM

    第一次出现大块头阿，我想做机器人玩 ，肖大哥指点指点。。。
    另外还期待着触摸哈～～～

  • wondering · 2009/02/28 at 10:20 AM

    看完你所有的帖子， 很佩服你的diy能力。
    请问你的pcb是在北京的工厂制作的吗？ 请问他们一次最少做多少片？ 价格多少？ 因为自己也想尝试一下。方便的话发个工厂的联系方法到邮箱好吗？

  • Author comment by flamingoeda · 2009/03/19 at 10:55 AM

    是的，在北京做的，一片也做的，但是价格就不合适了，嘻;-) 如果您也在北京的话，可以去中发市场找相应的厂家去做的。

Leave a Reply

<<

>>

Theme Design by devolux.nh2.me
To top